Audi Q2 30 TFSI (1.0T) 116hp

Stage 1Bosch MED17.1.27Petrol2019 →

Audi logo
Power

140hp

Factory
116 hp
Gain
+24 hp · +20.7%
Torque

240Nm

Factory
200 Nm
Gain
+40 Nm · +20%

Figures are measured on a healthy, well-maintained example under ideal conditions. Your car is checked before anything is written.

  • 100% custom made tuning file guarantee
  • Tested and developed on a 4x4 dynamometer
  • Best results made tuning within the safety margins
  • A decrease in fuel consumption

Engine specifications

Type of Fuel
Petrol
Method
MadeForStreet
Tuning Type
Stage 1
Cylinder content
999 CC
Compression ratio
10.5 : 1
Bore X Stroke
74.5 X 76.4 mm
Engine number
DLAA
Engine ECU
Bosch MED17.1.27

Systems included in this remap

  • Decat
  • DTC removal
  • Start & Stop off
  • Pop & Bang
Decat
Decat is applied to cars that do not have a catalyst in the exhaust range. After removing the catalyst, the ECU will detect this, which may cause error messages. Therefore, this must be adjusted software-wise.
DTC removal
DTC's, also known as Diagnostic Trouble Codes, are electronic messages in cases of problems with the engine or transmission. They can be switched off when the causes are found and solved.
Start & Stop off
A Start & Stop system is a system that is shutting off the engine when the engine runs stationary. The system can be turned off in a lot of cars via a button, but sometimes it isn't possible. For those cars, the Start & Stop system can be switched off in the engine management system.
Pop & Bang
Pop and bang is the principle of antilag, but then in coast down condition.

Availability depends on what the Audi Q2 30 TFSI (1.0T) 116hp hardware already supports. We confirm the list for your car before any file is written.

Other engines in the Audi Q2 2019 ->

All Audi Q2 generations

Get a quote for your Audi Q2 30 TFSI (1.0T) 116hp

Tell us what you are after and we come back with the stage options, the expected figures and the price for your car. Faster on the phone —+1 (407) 205-9010.