DS 4 1.2 PureTech 130hp
Stage 1Siemens/Continental V46.1Petrol2015 – 2020
150hp
- Factory
- 130 hp
- Gain
- +20 hp · +15.4%
270Nm
- Factory
- 230 Nm
- Gain
- +40 Nm · +17.4%
Figures are measured on a healthy, well-maintained example under ideal conditions. Your car is checked before anything is written.
- 100% custom made tuning file guarantee
- Tested and developed on a 4x4 dynamometer
- Best results made tuning within the safety margins
- A decrease in fuel consumption
Engine specifications
- Type of Fuel
- Petrol
- Method
- MadeForStreet
- Tuning Type
- Stage 1
- Cylinder content
- 1199 CC
- Compression ratio
- 10.5 : 1
- Bore X Stroke
- 75.0 X 90.5 mm
- Engine number
- EB2DT S
- Engine ECU
- Siemens/Continental V46.1
Systems included in this remap
- Decat
- DTC removal
- Vmax removal
- Decat
- Decat is applied to cars that do not have a catalyst in the exhaust range. After removing the catalyst, the ECU will detect this, which may cause error messages. Therefore, this must be adjusted software-wise.
- DTC removal
- DTC's, also known as Diagnostic Trouble Codes, are electronic messages in cases of problems with the engine or transmission. They can be switched off when the causes are found and solved.
- Vmax removal
- It is possible to remove the Vmax, which basically is a speed limiter. Nowadays, a lot of cars have a speed limiter and that means that the full potential of the car isn't reached.
Availability depends on what the DS 4 1.2 PureTech 130hp hardware already supports. We confirm the list for your car before any file is written.
Other engines in the DS 4 2015 - 2020
- 1.6 BlueHDI 8V 100hp
- 1.6 BlueHDi 8V 115hp
- 1.6 BlueHDi 8V 120hp
- 1.2 PureTech 130hpThis vehicle
- 2.0 BlueHDi 150hp
- 1.6 THP 165hp
- 2.0 BlueHDi 180hp
- 1.6 THP 200hp
- 1.6 THP 210hp
Get a quote for your DS 4 1.2 PureTech 130hp
Tell us what you are after and we come back with the stage options, the expected figures and the price for your car. Faster on the phone —+1 (407) 205-9010.