Porsche Macan S 3.0T 355hp

Stage 1Bosch MG1CS002Petrol2019 – 2021

Porsche logo
Power

400hp

Factory
355 hp
Gain
+45 hp · +12.7%
Torque

600Nm

Factory
480 Nm
Gain
+120 Nm · +25%

Figures are measured on a healthy, well-maintained example under ideal conditions. Your car is checked before anything is written.

  • 100% custom made tuning file guarantee
  • Tested and developed on a 4x4 dynamometer
  • Best results made tuning within the safety margins
  • A decrease in fuel consumption

Engine specifications

Type of Fuel
Petrol
Method
MadeForStreet
Tuning Type
Stage 1
Cylinder content
2995 CC
Compression ratio
11.2 : 1
Bore X Stroke
84.5 X 89.0 mm
Engine number
DLZB
Engine ECU
Bosch MG1CS002
Gearbox ECU
Temic DL501 Gen2

Systems included in this remap

  • Decat
  • DTC removal
  • Start & Stop off
  • Pop & Bang
Decat
Decat is applied to cars that do not have a catalyst in the exhaust range. After removing the catalyst, the ECU will detect this, which may cause error messages. Therefore, this must be adjusted software-wise.
DTC removal
DTC's, also known as Diagnostic Trouble Codes, are electronic messages in cases of problems with the engine or transmission. They can be switched off when the causes are found and solved.
Start & Stop off
A Start & Stop system is a system that is shutting off the engine when the engine runs stationary. The system can be turned off in a lot of cars via a button, but sometimes it isn't possible. For those cars, the Start & Stop system can be switched off in the engine management system.
Pop & Bang
Pop and bang is the principle of antilag, but then in coast down condition.

Availability depends on what the Porsche Macan S 3.0T 355hp hardware already supports. We confirm the list for your car before any file is written.

Other engines in the Porsche Macan 2019 - 2021

All Porsche Macan generations

Get a quote for your Porsche Macan S 3.0T 355hp

Tell us what you are after and we come back with the stage options, the expected figures and the price for your car. Faster on the phone —+1 (407) 205-9010.